McMorris Rodgers Statement on Completion of the VA's Electronic Health Record Modernization Strategic Review - Cathy McMorris Rodgers

mivo.indah.link

Washington, D.C. (June 30, 2021) – Eastern Washington Congresswoman Cathy McMorris Rodgers (WA-05) today issued the following statement after Department of Veterans Affairs Secretary Denis McDonough announced the completion of the 90-day Electronic Health Record Modernization Strategic Review:

“The VA made the right decision when it paused the EHRM and ordered a strategic review. Problems that have been identified at Mann-Grandstaff must be resolved before the system is deployed at additional VA sites. Transparency around the findings of the strategic review and accountability within the VA will be vital for righting the ship, as well as delivering Eastern Washington veterans the care they deserve.”

Veterans’ Affairs Committee Ranking Member Mike Bost (IL-12) also issued the following statement:

“I commend VA for pausing the Electronic Health Record Modernization program to solve the serious problems found in Spokane. The Secretary made the right call. Going forward, VA must demonstrate to Congress and veterans that this review was successful, and those problems are fixed. Adjusting the organizational chart is not enough. The electronic health record must improve. We also expect transparency and reliability in the schedule and cost estimate. This is already a multibillion-dollar effort. We owe it to veterans and taxpayers to make certain that it is a good and fruitful investment.”

NOTE: In March, Cathy called for a review of the Cerner electronic health record (EHR) system at the Mann-Grandstaff VA Medical Center in Spokane after hearing an increasing number of complaints and pleas for help from veterans in Eastern Washington. Her request was immediately agreed to by Department of Veterans Affairs Secretary Denis McDonough. Cathy continues to advocate for veterans, working to restore 24/7 urgent care and to address the community care backlog at the Mann-Grandstaff medical center.

###

Adblock test (Why?)

"Electronic" - Google News
July 01, 2021 at 03:40AM
https://ift.tt/3du0ETa

McMorris Rodgers Statement on Completion of the VA's Electronic Health Record Modernization Strategic Review - Cathy McMorris Rodgers
"Electronic" - Google News
https://ift.tt/3dmroCo
https://ift.tt/3bbj3jq

Long-term reliable physical health monitoring by sweat pore–inspired perforated electronic skins - Science Advances

mivo.indah.link

Abstract

Electronic skins (e-skins)—electronic sensors mechanically compliant to human skin—have long been developed as an ideal electronic platform for noninvasive human health monitoring. For reliable physical health monitoring, the interface between the e-skin and human skin must be conformal and intact consistently. However, conventional e-skins cannot perfectly permeate sweat in normal day-to-day activities, resulting in degradation of the intimate interface over time and impeding stable physical sensing. Here, we present a sweat pore–inspired perforated e-skin that can effectively suppress sweat accumulation and allow inorganic sensors to obtain physical health information without malfunctioning. The auxetic dumbbell through-hole patterns in perforated e-skins lead to synergistic effects on physical properties including mechanical reliability, conformability, areal mass density, and adhesion to the skin. The perforated e-skin allows one to laminate onto the skin with consistent homeostasis, enabling multiple inorganic sensors on the skin to reliably monitor the wearer’s health over a period of weeks.

INTRODUCTION

In the coming age of ubiquitous health monitoring, electronic skin (e-skin) represents one of the mainstream hardware innovations, enabling imperceptible and noninvasive health monitoring of human beings from the skin (1–3). Exciting progresses have been made in the field of e-skin–based health monitoring platforms including development of flexible/stretchable electronic circuits (4–7), skin-compatible adhesive patches (8–10), and their conformal lamination onto the skin. One of the crucial steps to advance this technology into the commercialization stage is to ensure long-term monitorability of physiological activities of our skins with high precision. Although improved flexibility/stretchability of the e-skin, by thinning down the thickness (7, 11, 12) and forming a mesh network (1, 6), can enhance conformability on the skin, accumulation of skin by-products such as sweat at the skin/e-skin interface cannot be avoided in current state-of-the-art e-skins, thus hampering precise cutaneous sensing for an extended period of time. Although accumulated sweat at the e-skin/skin interface has been used as a biomarker of chemical sensors (13, 14) and an energy source of fuel cells (15, 16), long-term conformability is not secured because accumulated sweat could cause malfunction of the physical sensors (11) and eventually delaminate the e-skin from the human skin. This trapped skin by-product degrades homeostatic functions of the skin (e.g., skin barrier function), resulting in perturbation of skin health information that is critical for diagnosis of skin disorders (e.g., erythema) and internal diseases (e.g., allergies) (17). However, there is a lack of innovation on “sweat” permeable e-skins (see table S1). Allowing “vapor” permeation through e-skins by open-mesh electronic circuits with porous elastomeric adhesives (8, 10, 18) and nanofiber-based e-skins (19–23) can alleviate these problems, resulting in increasing monitorability of physiological activity (up to 7 days of skin compatibility and ≥10 hours of continuous monitorability at the best case). However, this gas-permeable path is not enough to prevent sweat trapping–induced monitoring failures. Furthermore, organic-based physical sensors are not desirable for long-term reliable monitoring because of their instability to environmental factors such as moisture (24). Therefore, to perform reliable cutaneous health monitoring for long-term period without limitation of human activities, it is ideal to obtain e-skins that contain sweat-permeable channels with stable inorganic sensors.

Here, we introduce a sweat pore–inspired fully perforated e-skin containing inorganic sensor arrays that unlocks the way to completely permeate profuse sweat through e-skins. This allows unprecedentedly long and reliable health monitoring for over a week while maintaining healthy state of the human skin. We found that under profuse sweat condition, a conventional e-skin not only delaminates from the skin but also does not accurately sense due to sensor malfunction. We successfully avoid these by forming engineered hole patterns through inorganic thin-film sensor modules as well as elastomer adhesives, where the patterns are precisely designed to avoid fully blocking the sweat pores on human skins. Simultaneously, perforation has been engineered to enhance physical properties of materials (e.g., conformability and mechanical durability), overcoming intrinsic limits of materials. Making a fractal cut between two holes forms the shape of “dumbbell.” These unique dumbbell through-hole patterns construct an auxetic kirigami pattern that allows extreme conformability on the markedly bumpy surface of our skins, forming record-high work of adhesion to the skin that is comparable to commercialized skin adhesives (~20 N m⁻¹). Simultaneously, the circular holes at the edges not only act as a sweat removal paths but also suppress strain localization at the edge of the kirigami patterns, allowing fatigue-free mechanical reliability (>10⁶ fatigue cycles with 2-mm bending radius; 12.5% nominal tensile strain). This aggressive patterning of the e-skin additionally allows a reduction of areal mass density to ~1.5 mg cm⁻², which is a near ideal value for imperceptible lamination onto the skin while maintaining excellent mechanical stability and sweat permeability. On the basis of the perforated e-skin platform, we have integrated inorganic-based temperature, hydration, strain, and ultraviolet (UV) sensor arrays that are also perforated to secure sweat-permeable channels at the active region. These perforated sensors could obtain reliable biophysical data even under profuse sweating, whereas malfunction occurred on nonperforated e-skins. With our innovations on permeability, conformability, and stability, we demonstrate daily activity checkup of skin health over a week (including exercise at the gym) with no skin irritation. This paves the way for e-skin–based long-term reliable physical health monitoring with minimized disturbance to skin homeostasis.

RESULTS

Sweat pore–inspired perforated e-skins

For full sweat permeation, we uniquely designed our e-skin by being inspired by human sweat pores. The through-hole patterns on the e-skin were constructed with the following rationales: (i) The size and interspacing of the circular holes were engineered to provide outlet of gas and sweat from sweat pores, thus allowing the skin to maintain normal physiological activities without causing e-skin delamination and sensor malfunctioning, (ii) auxetic kirigami pattern were made between two adjacent holes to reduce the Young’s modulus and Poisson’s ratio, thus enhancing conformality on the irregular skin surface, and (iii) circular holes at the edge of the auxetic cuts were made to relieve localized strain, thus finally constructing dumbbell shaped patterns (see Fig. 1A). Figure 1B illustrates our perforated e-skin design. Auxetic dumbbell hole patterns are integrated into all the modules that construct our e-skin, including the electronic modules [Au interconnects and polyimide (PI) encapsulation] as well as the polydimethylsiloxane (PDMS) adhesive (figs. S1 to S6 and note S1.1). To demonstrate through-hole patterns, the pattern sizes were varied at each layer considering the misalignment of each layer during e-skin fabrication (fig. S1). The e-skin contains four different physical sensors (bottom of Fig. 1B): Pt resistance thermometer, capacitive-type Au hydration sensor, ZnO thin film–based strain sensor, and ZnO UV sensor. Interdigitated electrodes of thermometers and hydration sensors follow the auxetic dumbbell hole patterns, and all electronic modules are encapsulated with a PI layer to improve mechanical robustness by placing the modules close to neutral mechanical plane (fig. S7 and note S1.2). Figure 1C shows optical images of the corresponding e-skin regions where the sensors are also perforated to secure open channels at the sensing region (see figs. S4 to S6 and note S2 for detailed information of sensors). Figures S8 to S13 show sensing characteristics of each sensor where their performances are adequate for physical health monitoring on the skin. Note that ZnO strain sensors are suspended onto through-holes (no PDMS adhesive) for enhancing the sensitivity by reducing flexural rigidity of the active region (25) and by suppression of strain damping in the intrinsically stretchable PDMS layer (26). On the other hand, ZnO UV sensors are located on the PDMS adhesives to reduce strain dependency of the device conductance, and circular hole array patterns were formed at the top PI layer to provide penetration paths of UV light and to trigger UV-induced conductance changes of ZnO.

Fig. 1 Perforated e-skins with inorganic physical sensors.

(A) Design of auxetic dumbbell through-hole patterns for driving sweat-permeable channels and synergistic physical properties of e-skins. (B) Schematic illustration of perforated e-skins with (I) auxetic dumbbell through-hole patterns. As the hole interspacing is narrower than the average diameter of a sweat pore, the e-skin can form open channels on the pore. Four multiple sensors—(II) Pt resistance thermometer, (III) capacitive-type Au hydration sensor, and ZnO nano–thin-film–based (IV) strain and (V) UV sensor—are also perforated to suppress sweat trapping at the sensing regions. (C) Optical images of the perforated e-skins showing auxetic dumbbell through-hole patterns, Pt thermometer, Au hydration sensor, ZnO strain, and UV sensor. The images were obtained after lamination on the wrist, except for the leftmost image.

Sweat-permeable e-skins and reliable physical sensing

We designed circular holes in our auxetic dumbbell through-hole patterns to form sweat-permeable channels, as depicted in Fig. 2A. We conservatively assumed the average outer diameter of a sweat duct and the average distance between the center of the sweat pore on human skins to be ~100 μm (27) and ~400 μm (28), respectively. On the basis of these, we fixed an interdistance of the circular holes at 200 μm to have more holes than sweat pores on the skin. Then, we simulated the percentage of fully blocked skin pores by the function of diameter of the holes, thus increasing the hole size and reducing the interspacing of the holes (right of Fig. 2A). We found that when the hole diameter is larger than 100 μm, we can form sweat-permeable channel without full blocking of skin pores. Moreover, sweat permeability can also be enhanced by adding (i) auxetic kirigami patterns and (ii) additional hole patterns, thereby maintaining physiological activities of the skin such as perspiration and suppressing sweat accumulation at the e-skin/skin interface (fig. S1). Then, we fabricated dumbbell-patterned sensor modules using conventional photolithographic processes and transferred the stack temporarily to a semitransparent thermal release tape (TRT), followed by combining PDMS patches with dumbbell holes via soft lithography (figs. S2 and S3). We first evaluated the vapor permeability of e-skins by measuring the changes of transepidermal water loss (TEWL) of the forearm after the e-skin lamination (Fig. 2B). Nonperforated e-skins show substantial reduction of TEWL by 34.63% (±6.54%). On the other hand, conventional e-skins (perforation only on electronic modules but not on elastomers) and perforated e-skins maintain 88.93% (±9.54%) and 94.54% (±7.33%) TEWL, respectively, showing their excellent vapor permeability (see fig. S14 and note S3.1 for details of TEWL changes).

Fig. 2 Sweat-permeable e-skins with reliable physical sensing.

(A) Precision design of auxetic dumbbell through-holes to provide open channels on sweat pores. (B) Changes of TEWL of the forearm after e-skin lamination. (C) Stability of the e-skin/forehead interface under profuse sweating (after having a spicy meal). Perforated e-skins form steady conformal contact on the forehead, whereas sweat trapping and interface delamination occurred on conventional e-skin samples. Photo credit: Hanwool Yeon, Massachusetts Institute of Technology. (D) Areal changes of sweat trapped region after sweating. (E) Dehydration monitoring of moisturized forearm. Only the fully perforated e-skin obtained similar dehydration tendencies with the reference skin region measured by commercial skin hydration analyzer (Corneometer CM 825). (F) Skin compatibility test of e-skins through 1-week lamination on the forearm. (G) Tracking of forehead movements using strain sensors. During sweating, the ZnO strain sensor in perforated e-skins reliably monitors the movement, whereas malfunction occurs at the strain sensors in conventional e-skins because of sweat trapping and interface delamination. (H) Changes of skin hydration level and skin temperature after profuse sweating on the forehead.

Even with this excellent vapor permeability of conventional e-skin, however, actively inducing sweat on the skin does not only cause severe trapping of sweat at skin/e-skin interfaces but also induced sensor malfunctioning when the conventional e-skins were laminated to the human skin. As shown in Fig. 2C and movie S1, trapped sweat is immediately observed when laminating conventional e-skins on a forehead of our human subject right after stimulation of sweating through eating a spicy meal. On the other hand, our fully perforated e-skins maintained intimate contact without sweat accumulation at the interface. It should be noted that the demonstration of sweat permeability from our perforated e-skin is unprecedented, while vapor permeability of conventional e-skin has already been well demonstrated due to high vapor permeability of microporous silicone-based adhesives (8, 10, 29). Quantitative analysis on sweat trapped area measured by an image analyzer confirms effective evacuation of sweat from our perforated e-skin, while sweat was trapped below conventional e-skins (Fig. 2D). Although trapped sweat at the conventional e-skin/skin interface disappeared owing to the high-vapor permeability, it took around 4 hours for evaporation of trapped sweat. We further verified efficient liquid dissipation through our e-skin by measuring the hydration levels on a moisturized forearm via our hydration sensor, as shown in Fig. 2E. After soaking the forearm for 5 min, the e-skin was laminated on the wet skin and the hydration level was continuously measured for 15 min. Our fully perforated e-skin (blue line) measures immediate relaxation of the actual skin hydration level, which is consistent with results estimated by a commercial hydration sensor (gray point; Corneometer CM 825), while the conventional e-skin exhibits delayed relaxation behavior (red line). Our findings prove that our perforated e-skin allows both vapor and liquid permeation, while the conventional e-skin only permits vapor exchange through the e-skin. Our e-skin’s sweat permeability makes a notable impact on post-wear skin health and reliability of e-skin sensors. As shown in Fig. 2F, we monitored skin allergic reaction by a dermatologist after laminating our e-skin, conventional e-skin, and nonperforated e-skin on the forearm over a period of 1 week. Skin damages appeared for those who wore conventional/nonperforated e-skin, while none of the human subjects showed skin irritation after lamination of our perforated e-skin, thus proving excellent long-term skin compatibility of our e-skin.

In addition, we observed that our e-skin sensors reliably obtained physical information even under profuse sweating, as shown in Fig. 2G. After lamination of conventional e-skin and perforated e-skin on the forehead, we monitored movements of the forehead using the integrated strain sensors. Without sweating, both conventional and perforated e-skin correctly monitored tension and relaxation when frowning and relieving. Note that higher strain responsivity recorded from the perforated e-skin (four times) arises because a suspended freestanding structure of strain sensors reduces flexural rigidity of the sensor region (25), suppressing strain damping effect from the PDMS adhesive (26) (see note S2.1 and figs. S8 to S10 for details of the sensor performance). However, when we stimulated sweating on the forehead, sensor malfunctions occurred for conventional e-skins, while our perforated e-skin maintained its correct reading of the strain. Furthermore, as shown in Fig. 2H, sweat trapping at conventional e-skin/skin interface also induced wrong information from temperature and hydration sensors over 20 min, whereas the perforated e-skin could track recovery of the physical properties. These findings suggest that sweat accumulation must be avoided to achieve long-term conformability and monitorability. Our dumbbell hole patterns in the e-skin unlocked reliable operation of the e-skin for a long time, and this is achieved not only by effective dissipation of sweat but also by forming steady conformal contact on the human skin with mechanical stability, which will be further discussed in the following section.

Mechanical performance driven by auxetic dumbbell through-holes

Together with having complete evacuation of sweat, connecting two holes by line cuts forms auxetic dumbbell patterns, which have three mechanical benefits that include (i) excellent conformability due to reduced Young’s modulus and Poisson’s ratio with enhanced adhesion (30–32), (ii) substantial reduction of stress concentration at the tip of auxetic cuts by circular holes at the edges (although it is mainly designed for sweat dissipation) (33), and (iii) significant reduction of areal mass density due to largely patterned areas for long-term imperceptibility.

Figure 3A visually shows that our e-skins conformally follow the wrinkles of the skin without having significant interface delamination because of its auxetic structures (see fig. S6 for more images). We measured a record value of work of adhesion from our perforated e-skins as 20 (± 3.7) N m⁻¹, as shown in Fig. 3B, that is superior to other silicone-based e-skins (1) and is comparable to conventional skin bandages (34). It should be highlighted that although the aimed contact area of our fully perforated e-skin is smaller than that of conventional e-skin, the value of work of adhesion in our fully perforated e-skin is seven- and threefold higher than that of nonperforated e-skin and conventional e-skins, respectively (see fig. S15 for peel test results of each e-skin and note S3.2). This indicates that due to enhanced conformability of our perforated e-skins, its effective contract area is greater than that of other types of e-skins. These excellent conformability and strong work of adhesion can be attributed to skin-like nonlinear mechanical behaviors of our perforated e-skins with comparable mechanical parameters to those of the human forearm (35, 36) (see fig. S16 and note S3.3 for more details). We also found that rounding of the edges of auxetic cuts in the dumbbell patterns allows excellent mechanical durability of the e-skin compared to other types of e-skins. Figure 3C shows finite element analysis (FEA) results of the tensile characteristic of three different patterns (circular hole, auxetic cut, and auxetic dumbbell). Among the patterns, our dumbbell hole patterns show efficient release of localized strain at the edges of the auxetic cuts with the lowest microscopic strain up to 30% global strain, which would prevent crack formation at the edges of the cuts (see note S3.4 and fig. S16 for further details of the results). This structural engineering leads to superior durability of the auxetic dumbbell hole–patterned e-skins against bending fatigue cyclic test compared to e-skins that only have auxetic cuts or circular hole patterns, as shown in Fig. 3 (D and E). The interconnect resistance of the e-skin with the dumbbell hole patterns was nearly unchanged during 10⁶ bending fatigue cycles at 3.8% nominal tensile strain (0.15 mm⁻¹ bending curvature) due to prevention of cracking at the tip, whereas other patterned e-skins failed (Fig. 3D). Although the bending strain increased to 12.5%, the dumbbell patterned interconnects survived at 10⁶ cycles, while other patterned e-skins show a tendency that fatigue lifetime is inversely proportional to strain (see Fig. 3E and fig. S17 for more details). The increasing resistance with bending fatigue is mainly associated with localized strain-induced crack initiation/propagation (37). Thus, these results indicate that auxetic dumbbell hole design leads to fatigue-resistant e-skin by suppression of crack formation that can endure repeated mechanical deformation on skin during long-term cutaneous monitoring. Last, the auxetic dumbbell through-hole patterning substantially decreases areal mass density of e-skin of 1.45 mg cm⁻², only 36% of the mass density of conventional e-skins, as shown in Fig. 3F. This value is close to ideal realization of imperceptible e-skins (1, 8, 19).

Fig. 3 Mechanical performance of perforated e-skins.

(A) Optical images of perforated e-skins showing conformal contact on the forearm. (B) Work of adhesion of nonperforated, conventional, and perforated e-skins. (C) Strain distribution of three different patterns (circular hole, auxetic kirigami, and auxetic dumbbell) in uniaxial stretching simulation. (D) Cyclic bending fatigue test of e-skins under 0.15 mm⁻¹ bending curvature (3.8% nominal tensile strain) with various perforated patterns (no-pattern, circular hole, auxetic kirigami, and auxetic dumbbell holes). (E) Mechanical durability of e-skins with respect to the bending curvature. (F) Areal mass density of e-skins.

Long-term seamless health monitoring

Using our e-skin with superior sweat permeability, conformability, and mechanical stability, we attempted long-term seamless monitoring of skin health over a period of a few weeks. The e-skin was never detached from the skin at any point during the monitoring period. We measured the recovery of a damaged human skin over a period of a few weeks. For connecting sensors to external power, we used a releasable connector, composed of Ga-In liquid metal and Cu wire (fig. S18A). In addition, conventional e-skins were not used to perform long-term health monitoring, as we have obtained unreliable monitoring results from the conventional e-skins even for short-term monitoring tasks. We first induced erythema on the skin by applying a sodium lauryl sulfate (SLS) solution (38). Then, the hydration level on the skin was constantly monitored by using hydration sensors on the perforated e-skin. Simultaneously, by using the Corneometer, we measured the hydration level on the control area without the e-skin (Fig. 4A). The recovery of the damaged skin measured by the Corneometer shows three phases: (i) cornification due to dehydration, (ii) regeneration by returning to a normal hydration level, and (iii) recovery by maintaining a normal hydration level (see fig. S19 and note S4 for further details of the phenomena). The skin area laminated by our perforated e-skin exhibits the exact same track of skin recovery over 2 weeks as measured by the Corneometer, even while the skin is covered with the e-skin. The sensors still performed well after 2 weeks. This implies that (i) a wound healing process is not at all prohibited by our perforated e-skin due to complete interaction with the environment and (ii) the hydration sensor on our e-skin was capable of constant monitoring of the skin condition for 2 weeks without any malfunctioning, which is crucial for long-term cutaneous monitoring.

Fig. 4 Long-term health monitoring by perforated e-skins.

(A) Skin regeneration monitoring over a period of 2 weeks. Photographs of the inflamed skin region right after erythema and after 2 weeks, showing that perforated e-skin has a negligible adverse effect to skin regeneration (left images). Scale bars, 5 mm. Hydration level of the inflamed skin as a function of e-skin lamination days (right graph). Skin hydration level was monitored by a hydration sensor in the e-skin and simultaneously compared with a conventional hydration analyzer (Corneometer CM 825). Photo credit: Haneol Lee, Massachusetts Institute of Technology. (B) Daily activity checkup using perforated e-skin with multiple sensors for a week: wrist pulse, skin hydration level, skin temperature, and photoconductance. (C) Comparison of skin information using perforated e-skin before and after exercise at the gym over 30 min (top: wrist pulse, middle: skin hydration level, and bottom: skin temperature).

This encouraged us to operate all electronic modules for daily activity checkup for a long-term period including wrist pulse, hydration, temperature, and UV exposure by multiple sensors embedded in the perforated e-skin. Note that the releasable connects were also used for the discontinuous measurement. As shown in Fig. 4B, these parameters were successfully monitored without malfunctioning for more than a week (see fig. S18 and note S5 for the details of the demonstration including average power consumption). Because of superior reliability, our e-skin could repeatedly measure normal health information of a subject (male, 29): wrist pulse with ~51 beats per minute (bpm), skin hydration level of ~85 fF (~32 Corneometer value), and skin surface temperature of 33.7°C. Furthermore, the spatiotemporal information of the subject was obtained by the difference of photo-conductance at daytime (outside) and at nighttime (inside). On days 4 and 6, the human subject exercised (movie S2), and we were able to observe an increase in pulse, hydration, and temperature, as shown in Fig. 4C. After exercise, the blood flow was concentrated in skeletal muscles, initiating vasodilation of arterial vessels (39, 40). As a result, the pulse frequency and strength were increased to 120 bpm and by a factor of 5, respectively. Furthermore, skin temperature increased from 33.7° to 35.6°C and perspiration increased the skin hydration level. This unprecedented demonstration of long-term monitoring with multiple e-skin sensors offers advanced e-skin platforms for long-term, noninvasive health monitoring.

DISCUSSION

We have demonstrated simple and novel approaches to form long-term stable conformal skin-interfaced system. Our auxetic dumbbell through-hole patterns simultaneously enhance physical properties of conventional e-skin platform including mechanical reliability, conformability, work of adhesion, and areal mass density. The through-hole patterns, of which design is inspired from sweat pores, provide sweat-permeable channels and secure the skin homeostasis as well as conformal interface for a long-term period. In addition, perforation-engineered inorganic physical sensors reliably obtained health information from the skin even under profuse sweating because of the steady conformal interface. Although our perforated e-skins should be advanced in terms of real-time monitorability, long-term health monitoring tests were successfully performed including tracking of skin regeneration with no disturbance and daily activity checkup over a period of 1 week. We believe that our perforating design rules can open new directions for implementing reliable e-skin sensors for long-term health monitoring applications.

MATERIALS AND METHODS

Fabrication of electronic modules for perforated e-skins

Figure S2 illustrates the fabrication processes. Electronic modules were fabricated on Al/Ti (200 nm/40 nm)–coated, conductive Si wafer (<0.01 ohm·cm) and were released from the wafer through electrochemical dissolution of the Al layer. As a first step, the bottom PI layer (2 μm) was formed on the Al/Ti/Si wafer by spin coating and curing process (250°C for 1 hour). Au interconnects (100 nm) with the Cr adhesive layer (1 nm) were deposited on the bottom PI by e-beam evaporation and were patterned by the photoresist-based lift-off process (LOR 3A, MicroChem). For temperature sensor formation, auxetic Pt dumbbell meshes (40 nm) were formed between Au interconnects by e-beam evaporation and the subsequent lift-off process. For formation of ZnO thin-film sensors, ZnO thin films (100 nm) were directly deposited to Au contact/interconnects on the bottom PI by radio frequency (RF) sputtering at 200°C and were patterned using HCl solution. The HfO₂ layer (1.5 nm thick) was inserted at ZnO/Au contact by the atomic layer deposition process at 225°C, resulting in Schottky barrier formation (see fig. S8, B and D). Furthermore, the HfO₂ capping layer (3 nm) was formed at the ZnO top surface for the protection from subsequent processes. The top PI layer (2 μm) was formed on the entire sample surface to locate the electronic circuits near neutral mechanical plane, thereby improving the mechanical robustness (note S1.2 and fig. S7). Note that some interfaces among layers were treated with 1% (v/v) 3-aminopropyltriethoxysilane (APTES) in deionized water to improve interface strength. Last, after the PI layers are patterned by oxygen plasma with a Cu hard mask (50 nm), fabrication of the auxetic dumbbell hole–patterned electronic modules is completed.

Perforated e-skin fabrication

For integration of the electronic modules to the auxetic dumbbell hole–patterned PDMS adhesives (SYLGARD 184, Dow Corning), detachment of the electronic modules by the electrochemical lift-off process (dissolution of Al sacrificial layer) was the first step, as shown in fig. S2. Before the lift-off process, the electronic modules were attached to TRT. Between modules and TRT, the 2-μm-thick poly(methyl methacrylate) (PMMA) layer was inserted. After electrical wiring at the backside of the Si substrate, the samples were dipped into NaCl solution (0.9% NaCl) together with Pt wire as a counter electrode. As 3 V was applied to the Si wafer, the Al was dissolved in NaCl solution and electronic modules were transferred to the TRT accordingly. To form auxetic dumbbell through-hole patterns in the electronic modules and the PDMS adhesives, Si mold–based soft lithography processes were used as illustrated in fig. S3. First, dumbbell-shaped Si mold (~20 μm depth) was prepared by deep reactive ion etching (DRIE). After spin coating of off-stoichiometric, sticky PDMS gels (40:1 weight ratio of PDMS prepolymer:curing agent) on the Si mold, the electronic modules with TRT were placed on the uncured PDMS. Semitransparency of the TRT allowed us to align auxetic dumbbell mesh of the electronic circuits with the Si mold. After the alignment, the PDMS layer was cured at 80°C with a constant pressure (1.29 kPa) to maximize the yield of the through-hole formation in e-skin. Note that a weight (1 kg) was used to apply the pressure where a flat steel plat was inserted between a weight and an e-skin sample on Si mold for spatially uniform through-holes. After PDMS curing, the Si mold was separated from the samples. Note that the Si mold was treated with trichloro(1H, 1H, 2H, 2H-perfluorooctyl)silane to reduce the Si surface energy, while APTES treatment was conducted on the surface of the electronic modules right before placing onto the uncured PDMS adhesives. Thus, the interface strength between the electronic modules and the PDMS adhesive is much stronger than Si mold/PDMS interface strength, and these interface engineering processes facilitated the transfer of PDMS adhesives to the electronic modules without notable damages. For spatially uniform coating of the silane, oxygen plasma treatment is necessary to form hydrophilic Si mold surface. After detachment of the perforated electronic modules and the perforated PDMS adhesives from the Si mold, the TRT was released by heating at 150°C and the samples were dipped into acetone to remove PMMA. As the PMMA layer was dissolved, the perforated e-skin is produced. The perforated e-skin was scooped from acetone using cellulose wipers (TX2009, Texwipe) and cleaned by isopropanol. After drying of the perforated e-skin on the wipers, the edge of the perforated e-skin was attached to a temporary tattoo paper (Silhouette, USA), which acts as a temporary handling layer (fig. S5A). Note that the PDMS adhesion can be degraded when the e-skin samples are exposed to air for over 2 weeks. This environmental aging is strongly related with interaction of PDMS surface with air (moisture and oxygen) (34). To suppress the environmental aging effect, all experiments were performed only when e-skin samples were exposed to air less than a week.

Finite element simulation

FEA was performed with ABAQUS/CAE. Three representative volume element (RVE) models, circular hole, auxetic kirigami, and dumbbell hole pattern were prepared with computer-aided design software. A periodic boundary condition was applied to the individual RVE model to reduce computation costs. C3D8 mesh elements were used. Before the stretch simulation, linear buckling analysis determined buckling eigenmodes. The resultant modes served as initial imperfection of individual model for post-buckling calculation. To observe the tensile behavior of each geometry, displacement was applied at both ends so that the global strain reached 30%. Linear elastic property was used for PI material (2.5 GPa Young’s modulus, 0.3 Poisson’s ratio).

Evaluation of mechanical properties and reliability

Uniaxial tensile tests were conducted with a micro material tester (MMT-500N, Shimadzu, Japan), and the electrical resistance of interconnects on the e-skin was measured simultaneously (41). The strain rate was 5% min⁻¹. For bending fatigue test, various types of Au interconnects (unpatterned, circular hole, auxetic kirigami, and auxetic dumbbell hole patterns) were formed on the e-skin (fig. S17). To load the samples into a sliding bending fatigue tester (Slide tester, CKSI, South Korea), each sample was attached on a 125-μm-thick PI handling substrate. The width and length of each sample were 4 mm and 20 mm, respectively. The fatigue system consists of two plates (fig. S17A): The top plate is stationary, while the bottom plate moves in a cyclic linear motion (37). The e-skin/PI substrates were bent between two plates, and a cyclic strain was applied on the e-skin samples as the bottom plate was displaced repeatedly. Because the e-skin samples were positioned outward from the PI handling substrate, tensile strain was applied upon bending. The linear displacement of the bottom plate was 10 mm, and the maximum cycling number was 10⁶ with 5-Hz cycling frequency. The bending radius condition was modulated from 10.8 mm (2.3% nominal tensile strain) to 2 mm (12.5% tensile strain). See fig. S7C and notes S1.2 and S3.4 for details of calculation of the nominal bending strain. During the bending fatigue test, electrical resistance of the Au interconnects on e-skin was measured simultaneously using Agilent 34410A to monitor the evolution of fatigue damages on the Au interconnects.

Peel test

Adhesion force of the e-skin was evaluated by a peel test, which was executed by a customized loading machine with a translational stage and a load cell for accurate control of the moving speed (42). Before measurements, the e-skin was conformably laminated onto the human forearm. One end of the laminated e-skin was grabbed and fixed to the load cell. For peeling the e-skin from the skin, the load cell and the translational stage simultaneously shifted in the z and x direction with a speed of 0.2 mm s⁻¹, respectively.

Sensor assessment

Capacitance-voltage (C-V) and capacitance-time (C-t) measurements of the skin hydration sensor were carried out with an Agilent B1500A semiconductor device parameter analyzer. Changes of the electrical conductance of the temperature sensor, the strain sensor, and the UV sensor were monitored by current-voltage (I-V) and current-time (I-t) mode of Keithley 2400 Sourcemeter. Portable National Instruments USB-4067 6 ½ Digit DMM was also used to collect the electrical resistance data from the temperature sensor.

Evaluation of UV-sensing performance

UV conformal photocurrent microscopy (UVCPM) system was established to assess UV-sensing performance of ZnO e-skin sensors (see note S2.3 and fig. S12 for details of UVCPM system). The output currents from sensors were recorded with varying biases and illumination intensity with an Agilent B1500A semiconductor device parameter analyzer.

E-skin conformability and sensing reliability under profuse sweating

After the e-skin lamination onto the forehead, sweating was stimulated by eating a spicy meal. The sweating-induced changes of the e-skin conformability and sensing accuracy of the e-skin sensors were assessed simultaneously. The test was approved by Massachusetts Institute of Technology, Committee on the Use of Humans as Experimental Subjects (approval number: 1706011631R002).

Skin assessment after 1-week e-skin lamination

Nineteen human subjects executed e-skin lamination tests (4 male and 15 female subjects, average age of 31.3). Subjects attached the e-skins (nonperforated, conventional, and perforated e-skins) onto the forearm, which was preserved by a rubber-based air-permeable protector from external mechanical stresses. After 1 week, the e-skins were removed from the subject’s arm. Skin health evaluation of visual comparison (Visia-CR, Canfield) was conducted before e-skin attachment and immediately, 1 hour, and 24 hours after e-skin removal, each two times. In visual comparison, visible symptoms (e.g., erythema, edema, dryness, and scales) of subjects were evaluated from one to four points, and conscious symptoms (e.g., tingling, burning, and itching) of subjects were recorded to the case reports. On the basis of meticulous evaluation, the safety of the e-skin was judged. The test was approved by AMORE PACIFIC, Institutional Review Board Committee (approval number: 2019-1SR-N088S).

Skin regeneration test for 2 weeks

First, two regions of the forearm were intentionally irritated by application of 35 μl of 1% SLS solution for 24 hours (36). One of the inflamed skin regions was covered by our perforated e-skin, and the other region was exposed to the ambient (controlled region). For 2 weeks, the degree of skin regeneration was estimated by measuring the skin hydration level using a hydration sensor of the e-skin and/or commercial hydration analyzer (Corneometer CM 825) on the control region. The test was approved by Massachusetts Institute of Technology, Committee on the Use of Humans as Experimental Subjects (approval number: 2003000116).

Daily activity checkup for 1 week

Perforated e-skin with multiple sensors including strain, UV, temperature, and hydration sensors was laminated onto the human wrist. To obtain health information from the e-skin over a long period, releasable interconnects, composed of Ga-In eutectic liquid metal and Cu wires, were used. In addition, the e-skin was passivated from mechanical frictions caused by clothing using a patch test chamber (The Hill Top Chamber, Cliantha Research). Note S5 and fig. S18 contain details of the experiment. The test was approved by Massachusetts Institute of Technology, Committee on the Use of Humans as Experimental Subjects (approval number: 1706011631R002).

SUPPLEMENTARY MATERIALS

Acknowledgments: Funding: This work is supported by AMOREPACIFIC. Author contributions: H.Y., J.H., and J.K. conceived this work, and J.K. supervised the team. H.Y., H.L., and J.K. designed experiments and prepared the manuscript. H.Y. and H.L. developed perforated e-skins. H.Y., H.L., and D.L. performed the device fabrication. Y.K., J.S., J.K., J.M.S., J.L., S.K., S.H., and S.-H.B. contributed to equipment setup for e-skin fabrication. P.L., C.C., and J.L. made measurement programs. H.Y., H.L., C.C., D.L., H.K., J.K., D.K., K.K., H.S.K., and M.-C.P. performed the e-skin sensor measurement and image analysis of e-skins. H.L. and H.Y. conducted long-term health monitoring. Y.L. conducted finite element simulation and contributed to design of auxetic dumbbell hole patterns. J.L. and Y.-C.J. evaluated mechanical properties and reliability of e-skins. B.S.M. and T.-S.K. evaluated adhesion of e-skins. J.H. and E.K. led clinical study including skin compatibility test of e-skin and evaluation of e-skin breathability on the forearm. All authors discussed and contributed to the discussion and analysis of the results regarding the manuscript at all stages. Competing interests: The authors declare that they have no competing interests. Data and materials availability: All data needed to evaluate the conclusions in the paper are present in the paper and/or the Supplementary Materials.

• Copyright © 2021 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Adblock test (Why?)

"Electronic" - Google News
July 01, 2021 at 01:02AM
https://ift.tt/3Ag9aPq

Long-term reliable physical health monitoring by sweat pore–inspired perforated electronic skins - Science Advances
"Electronic" - Google News
https://ift.tt/3dmroCo
https://ift.tt/3bbj3jq

Unity supervisors to vote on loosened zoning requirements for electronic billboards - TribLIVE

mivo.indah.link

Unity supervisors in July will consider a zoning amendment meant to make it easier to convert conventional single-image billboards to electronic billboards in the township.

The zoning change would be a win-win for the township and for local businesses that are looking to get the word out about their products or services, Supervisor Mike O’Barto said following a hearing this week on the amendment.

“You see many existing billboards that are actually blighted, falling apart and falling down,” O’Barto said. “Hopefully, this will kind of fix that situation.

“But, not everybody can afford a digital billboard either, so I don’t think you’re going to see a ton of them.”

Township Solicitor Gary Falatovich explained the amendment allows an owner to convert each side of a billboard to an electronic version, with changing images. But, he said, it does not allow for expansion of the billboard’s size.

Under the proposed ordinance revisions, more than one existing billboard on a given property may undergo electronic conversion as long as they remain at least 500 feet apart. That cuts in half the minimum distance between electronic billboards the township currently requires.

Any new electronic billboard would require approval from the township as a conditional use, as would any new standard billboard, Falatovich said.

According to the solicitor, the township opted to refrain from setting standard brightness levels for electronic billboards either during daylight hours or after dark, because of differences in conditions along different stretches of road. “There may be areas where the (brightness) would be so low you wouldn’t be able to read the billboard because of the ambient light in the area,” he said.

Instead, the amended ordinance incorporates PennDOT language for regulating the brightness of the billboards. It requires that billboards have devices to automatically dim them during the course of a day.

Also, they may not direct light into a road’s travel lanes or cause a glare that would impair the vision of passing drivers.

The modified ordinance also would allow billboard messages to change more frequently — once every 15 seconds, down from 30 seconds.

David Paulone of Hempfield, who owns two fixed-copy billboards in Unity, spoke at the hearing and later indicated he’s pleased with some of the provisions regarding electronic conversions.

“Our concern was that people need to advertise more, and one (standard) vinyl billboard just doesn’t get the message out,” Paulone said. “By (Unity) allowing us to do digital billboards, more messages can get out.”

Other ordinance amendments under consideration would designate multi-family dwellings as a permitted use in R-2 and R-3 residential zoning districts while listing aviation sales, services and storage as permitted uses in the institutional airpark district.

The supervisors are expected to vote on the ordinance modifications at their July 8 meeting.

Jeff Himler is a Tribune-Review staff writer. You can contact Jeff at 724-836-6622, jhimler@triblive.com or via Twitter .

Adblock test (Why?)

"Electronic" - Google News
June 30, 2021 at 10:30PM
https://ift.tt/2UL8HEo

Unity supervisors to vote on loosened zoning requirements for electronic billboards - TribLIVE
"Electronic" - Google News
https://ift.tt/3dmroCo
https://ift.tt/3bbj3jq

Renault revives models of the past for an electric future - Reuters

mivo.indah.link

• Alliance aims to produce 1 mln EVs a year by 2030
• Renault promises 10 new electric models by 2025
• Renault ups target for share of electric in brand mix
• Offers fleeting glimpse of its new electric '4ever'

PARIS, June 30 (Reuters) - Renault (RENA.PA) unveiled a more ambitious strategy for electric vehicles (EVs) on Wednesday, betting on new, affordable versions of its iconic small cars of the past to catch up with Volkswagen (VOWG.DE) in the fast-growing sector.

The French carmaker's Chief Executive Luca de Meo said it would launch 10 new EVs by 2025 and that all-electric vehicles would account for up to 90% of its models by 2030, dropping its reliance on hybrids to hit the target under a previous plan.

Renault is betting that an electric version of its classic Renault 5 compact car, which was discontinued in the 1990s, will capture the imagination of today's drivers when it goes on sale in the first half of 2024.

At a live-streamed presentation on Wednesday, the company also offered a fleeting glimpse of its new electric "4ever". Two sources close to the company said it was a revival of the Renault 4 hatchback which went out of production last century.

"Today is an historic acceleration of Renault Group's EV strategy," de Meo said in a statement.

De Meo said that new, purpose-built electric car platforms and a cluster of production sites in northern France would allow Renault to deliver EVs at a lower cost.

The first of its new EVs will be the MeganE hatchback which is due to go on sale in the first half of 2022.

By 2030, Renault and its alliance partners, Nissan (7201.T) and Mitsubishi (7211.T), will be producing one million EVs globally a year, up from the 200,000 they made in 2020, the French carmaker said.

Tesla (TSLA.O), the world's most valuable carmaker, is already close to hitting that target, with sales of between 840,000 and one million EVs projected for this year.

SHRINKING SHARE

Renault's Zoe model, the biggest-selling battery electric car in its segment in Europe for years, is losing ground to models such as Volkswagen's ID.3 compact electric car.

Figures from database EV-Volumes.com showed Volkswagen's share of the EV market in Europe soared to 25% last year from 14% in 2019, overtaking the Renault-Nissan-Mitsubishi alliance, whose share shrank to 19% from 23% in 2019. read more

In the first quarter of 2021, Renault's share fell further to 15%, tying with Tesla for third place behind Volkswagen on 21% and Stellantis (STLA.MI) on 17%, EV-Volumes.com data showed.

De Meo, a former Volkswagen executive who turned the German automaker's Seat brand around, has been tasked with helping Renault turn a new page after a troubled spell.

Former boss Carlos Ghosn was ousted and arrested in Japan in 2018 on charges of financial malpractice, which he denies. Ghosn left behind a sprawling model range with low margins and Renault racked up heavy losses when global demand for cars fell.

De Meo's turnaround plan - which he calls a "Renaulution" - is to lay off thousands of workers, cut the model range and improve cooperation between alliance partners on production.

Renault said this month it would combine three of its plants in northern France into a new legal entity, Renault ElectriCity, that will produce 400,000 vehicles a year by 2025.

The company has previously said it will use purpose-designed vehicle platforms, known as CMF B-EV and CMF A, to produce small and affordable EVs.

It said on Wednesday that the CMF B-EV platform would allow it to produce a vehicle at two-thirds of the cost of making the Zoe model now.

"We want to democratise electric technology," Renault's de Meo said. "When you have a car at 20 to 25,000 euros, you have much more chance than selling a car at 45,000 euros. It's as simple as that."

Writing by Christian Lowe; Editing by David Clarke

Our Standards: The Thomson Reuters Trust Principles.

Adblock test (Why?)

"electric" - Google News
June 30, 2021 at 06:56PM
https://ift.tt/2Tf3OmS

Renault revives models of the past for an electric future - Reuters
"electric" - Google News
https://ift.tt/2yk35WT
https://ift.tt/3bbj3jq

The U.S. is falling further behind China and Europe in electric-vehicle production - CNBC

mivo.indah.link

In this article

• TSLA

U.S. President Joe Biden test the new Ford F-150 lightning truck as as he visits VDAB at Ford Dearborn Development Center in Dearborn, Michigan, May 18, 2021.

Leah Millis | Reuters

The U.S. lags behind China and Europe when it comes to production and uptake of electric vehicles domestically, according to a new study by the International Council on Clean Transportation — and that gap widened from 2017 to 2020.

The world manufactured more than 10 million electric passenger vehicles between 2010 and 2020, according to the study. At the end of 2017, automakers based in the U.S. had churned out 20% of the global stock. By 2020, U.S. automakers represented just 18% of the cumulative number of EVs produced since 2010, while share of production rose in China and Europe.

ICCT said government policies promoting EVs made the difference.

"Electric vehicle manufacturing growth happens where there are strong national policies designed to spur the market forward," Nic Lutsey, program director at ICCT, said in a statement. "Hundreds of billions of dollars are on the table, and the United States hasn't even bothered to pull up a chair."

From 2010 to 2020, researchers found, China was the largest EV producer geographically and accounted for about 44% of electric vehicles manufactured, with about 4.6 million units in both production and sales during the decade.

Europe produced 25% of global electric vehicles from 2010 to 2020, manufacturing 2.6 million and selling 3.2 million, making the region a net importer.

Tesla China-made Model 3 vehicles are seen during a delivery event at its factory in Shanghai, China January 7, 2020.

Aly Song | Reuters

Looking at last year alone, U.S.-based automakers produced at least 450,000 electric vehicles, with Tesla accounting for about 85% of that output for the year. Annual EV exports from plants in the U.S. in 2020 exceeded 215,000, the most of any single nation.

Stronger demand overseas than in the U.S. makes it a necessity for EV makers such as Tesla to ship, and set up shop, beyond the U.S. Companies tend to sell their electric vehicles relatively near the plants where they are assembled.

Electrics, including hybrids and pure battery electric vehicles, made up just 2.3% of new vehicle sales in the U.S. in 2020. Meanwhile, 10% of new vehicle sales in Europe were electrics, and 6% were electrics in China.

That demand overseas is creating a network effect of sorts. Automakers have committed more money and are making more aggressive plans to set up new plants and sell a greater variety of EV models overseas than they are in the U.S., the ICCT study notes.

For example, Volkswagen is expected to have the greatest total electric-vehicle production by 2025, based on the company's announced plans and investments to date, with no all-EV plants in the U.S. but several all-EV assembly plants in Europe and China.

Only two of 44 vehicle assembly plants in the U.S. were dedicated to making only electric vehicles in 2020, the ICCT report said. Three GM plants are scheduled to be converted to produce only EVs in 2021, and Tesla and Lucid Motors each have one new all-EV plant under construction. That would total seven of the 44 U.S. vehicle assembly plants that would be dedicated to making only EVs by 2025, based on companies' plans.

Policies "focused on a transition to zero-emission vehicles," or a lack thereof, have spurred these global trends, ICCT researchers concluded.

In Europe, the study notes, automakers have introduced dozens of new electric models and greatly increased the volume of electric cars they are making or plan to make, compared with the U.S. in recent years. This move is largely to meet regional vehicle emission standards.

In China, both "demand- and supply-side policies" helped drive greater production and adoption of electric vehicles, the study found. China has extended a variety of consumer incentives and strengthened regulations that limit internal combustion engine vehicles, while making it easier to buy, register and drive electrics instead. 

Meanwhile, in the U.S. some vehicle efficiency standards were rolled back under former President Donald Trump. And federal electric-vehicle purchasing incentives began phasing out for automakers with the highest volume of EV sales, such as Tesla and GM.

A new bipartisan infrastructure plan in the U.S. includes $15 billion toward electric-vehicle infrastructure, electric buses and transit — a fraction of President Joe Biden's earlier proposal to spend $174 billion on boosting the EV market.

Read the full study here.

Correction: This story has been updated to reflect that, based on companies' plans, seven of the 44 U.S. vehicle assembly plants are expected to be dedicated to making only electric vehicles by 2025.

Adblock test (Why?)

"electric" - Google News
June 29, 2021 at 11:43PM
https://ift.tt/3h2dLwQ

The U.S. is falling further behind China and Europe in electric-vehicle production - CNBC
"electric" - Google News
https://ift.tt/2yk35WT
https://ift.tt/3bbj3jq

Stretching changes the electronic properties of graphene - Science Daily

mivo.indah.link

The electronic properties of graphene can be specifically modified by stretching the material evenly, say researchers at the University of Basel. These results open the door to the development of new types of electronic components.

Graphene consists of a single layer of carbon atoms arranged in a hexagonal lattice. The material is very flexible and has excellent electronic properties, making it attractive for numerous applications -- electronic components in particular.

Researchers led by Professor Christian Schönenberger at the Swiss Nanoscience Institute and the Department of Physics at the University of Basel have now studied how the material's electronic properties can be manipulated by mechanical stretching. In order to do this, they developed a kind of rack by which they stretch the atomically thin graphene layer in a controlled manner, while measuring its electronic properties.

Sandwiches on the rack

The scientists first prepared a "sandwich" comprising a layer of graphene between two layers of boron nitride. This stack of layers, furnished with electrical contacts, was placed on a flexible substrate.

The researchers then applied a force to the center of the sandwich from below using a wedge. "This enabled us to bend the stack in a controlled way, and to elongate the entire graphene layer," explained lead author Dr. Lujun Wang.

"Stretching the graphene allowed us to specifically change the distance between the carbon atoms, and thus their binding energy," added Dr. Andreas Baumgartner, who supervised the experiment.

Altered electronic states

The researchers first calibrated the stretching of the graphene using optical methods. They then used electrical transport measurements to study how the deformation of the graphene changes the electronic energies. The measurements need to be performed at minus 269°C for the energy changes to become visible.

"The distance between the atomic nuclei directly influences the properties of the electronic states in graphene," said Baumgartner, summarizing the results. "With uniform stretching, only the electron velocity and energy can change. The energy change is essentially the 'scalar potential' predicted by theory, which we have now been able to demonstrate experimentally."

These results could lead, for example, to the development of new sensors or new types of transistors. In addition, graphene serves as a model system for other two-dimensional materials that have become an important research topic worldwide in recent years.

Story Source:

Materials provided by Swiss Nanoscience Institute, University of Basel. Note: Content may be edited for style and length.

Adblock test (Why?)

"Electronic" - Google News
June 29, 2021 at 11:42PM
https://ift.tt/3x7HFVY

Stretching changes the electronic properties of graphene - Science Daily
"Electronic" - Google News
https://ift.tt/3dmroCo
https://ift.tt/3bbj3jq

BAE Systems ramps F-35 electronic warfare manufacturing - Aerospace Manufacturing

mivo.indah.link

BAE Systems is providing Lockheed Martin with additional electronic warfare (EW) systems, retrofit kits, and spares for the F-35 fighter jet.

The contract builds on BAE Systems’ on-time delivery of more than 800 AN/ASQ-239 electronic warfare/countermeasure systems to date, providing F-35 jets with critical situational awareness and survivability capabilities.

“We’ve delivered cutting-edge electronic warfare systems for every F-35 fighter,” said Deb Norton, vice president of F-35 solutions at BAE Systems. “Our team is focused on manufacturing excellence and execution, providing agile, adaptable systems to outpace the current and future threat.”

This Lot 16 award comes as BAE Systems delivers Lot 14 systems and executes material orders for Lot 15. The company is currently producing 18 shipsets a month as it ramps production to more than 20 shipsets a month in 2022 to match F-35 aircraft Low Rate Initial Production.

The AN/ASQ-239 EW system provides advanced offensive and defensive capabilities that enable the F-35 to engage complex and highly capable threats. The innovative system is designed for performance, manufacturability, sustainability, and future upgradability.

BAE Systems has reduced the cost of the F-35 EW system by 77% since it was first produced and achieving all affordability targets since the inception of the programme. The company is also among Lockheed Martin’s highest-rated suppliers for both quality and on-time delivery.

BAE Systems is a leader in EW – designing, manufacturing, and sustaining some of the most advanced systems in the world. The company is focused on agile engineering, manufacturing, and sustainment solutions to accelerate the transition of laboratory innovations to the field. The company’s expertise in performance-based logistics has yielded a 60% improvement in F-35 EW system availability.

The AN/ASQ-239 system is manufactured at the BAE Systems EW production facility in Nashua, New Hampshire.

www.baesystems.com/ew

Michael Tyrrell

Michael Tyrrell

Digital Coordinator

Tags

Share This Article

Subscribe to our FREE Newsletter

Related Articles

Most recent Articles

Adblock test (Why?)

"Electronic" - Google News
June 29, 2021 at 09:55PM
https://ift.tt/3AmGsfM

BAE Systems ramps F-35 electronic warfare manufacturing - Aerospace Manufacturing
"Electronic" - Google News
https://ift.tt/3dmroCo
https://ift.tt/3bbj3jq

Researchers show that stretching can change the electronic properties of graphene | Graphene-Info - Graphene-Info

mivo.indah.link

A research team led by the University of Basel has found that the electronic properties of graphene can be specifically modified by stretching the material evenly.

The researchers, led by Professor Christian Schönenberger at the Swiss Nanoscience Institute and the Department of Physics at the University of Basel, have studied how the material’s electronic properties can be manipulated by mechanical stretching. In order to do this, they developed a kind of rack by which they stretch the atomically thin graphene layer in a controlled manner, while measuring its electronic properties.

The scientists first prepared a “sandwich” comprising a layer of graphene between two layers of boron nitride. This stack of layers, furnished with electrical contacts, was placed on a flexible substrate.

The researchers then applied a force to the center of the sandwich from below using a wedge. “This enabled us to bend the stack in a controlled way, and to elongate the entire graphene layer,” explained lead author Dr. Lujun Wang.

“Stretching the graphene allowed us to specifically change the distance between the carbon atoms, and thus their binding energy,” added Dr. Andreas Baumgartner, who supervised the experiment.

The researchers first calibrated the stretching of the graphene using optical methods. They then used electrical transport measurements to study how the deformation of the graphene changes the electronic energies. The measurements need to be performed at minus 269 °C for the energy changes to become visible.

“The distance between the atomic nuclei directly influences the properties of the electronic states in graphene,” said Baumgartner, summarizing the results. “With uniform stretching, only the electron velocity and energy can change. The energy change is essentially the ‘scalar potential’ predicted by theory, which we have now been able to demonstrate experimentally.”

These results could lead, for example, to the development of new electronic devices, sensors or new types of transistors. In addition, graphene serves as a model system for other two-dimensional materials that have become an important research topic worldwide in recent years.

Adblock test (Why?)

"Electronic" - Google News
June 29, 2021 at 08:48PM
https://ift.tt/3w2HQAQ

Researchers show that stretching can change the electronic properties of graphene | Graphene-Info - Graphene-Info
"Electronic" - Google News
https://ift.tt/3dmroCo
https://ift.tt/3bbj3jq